This reservoir is designed as a buried tank and consists of two identical chambers with a volume of 250 m3 each, which have a common closure. The upper panel and tank walls are 25cm thick, the lower panel is 30cm thick, and the partition wall is 20cm thick. MB 30, V6 waterproof concrete is provided for the tank and the shutter. All concrete surfaces in contact with water are insulated with rigid penetration-based waterproofing. Exterior waterproofing is done by installing bitumen waterproofing – by welding 2 coats of Kondor-4 to the previous coating with bitulite. The entire complex around the tank is protected by a lock fence with an entrance gate.